|
Standard Film Capacitor Products Offered
| Surface Mount |
| SERIES |
DESCRIPTION |
CAP. RANGE |
VOLT. RANGE
(DC) |
TEMP. RANGE
(°C) |
| 931AF |
Polyethylene Teraphalate Metallized (PET-HT) High CV |
.001 - 4.7µF |
63 - 630 |
-55 ~ +125 |
| 932 |
Polyethylene Napthalate Metallized (PEN) Low Profile |
.001 - 1.0µF |
16 - 250 |
-55 ~ +105 |
| 932A |
Polyethylene Teraphalate Metallized (PET) High CV |
.001 - 4.7µF |
16 - 630 |
-55 ~ +125 |
| 932AF |
Polyethylene Napthalate Metallized (PEN) High CV |
.001 - 1.5µF |
25 - 400 |
-55 ~ +125 |
| 932D |
Polyethylene Napthalate Metallized (PEN) ADSL / DC Blocking |
.001 - .15µF |
250 - 400 |
-55 ~ +85 |
| 932X |
Polyethylene Napthalate Metallized (PEN) Standard |
.001 - .01µF |
100 |
-55 ~ +105 |
| 933 |
Polyphenylene Sulfide Metallized (PPS) Low Profile |
.0047 - .22µF |
50 |
-55 ~ +125 |
| 933AF |
Polyphenylene Sulfide Metallized (PPS) Standard |
.001 - .15µF |
16 - 50 |
-55 ~ +125 |
| 933X |
Polyphenylene Sulfide Metallized (PPS) Standard |
.0001 - .1µF |
16 - 50 |
-55 ~ +125 |
| 935X |
Acrylic Metallized Stacked |
.01 - 1.0µF |
16 |
-40 ~ +85 |
| Radial Dipped |
| SERIES |
DESCRIPTION |
CAP. RANGE |
VOLT. RANGE
(DC) |
TEMP. RANGE
(°C) |
| 2013S |
Polypropylene Epoxy Dip, Series Wound |
.001 - .10µF |
1000 - 2000 |
-40 ~ +85 |
| 2014 |
Polypropylene Epoxy Dip |
.001 - .47µF |
100 - 1000 |
-40 ~ +85 |
| 2014S |
Polypropylene Epoxy Dip, High Voltage |
.001 - .033µF |
1000 - 2000 |
-25 ~ +85 |
| 2114 |
Polypropylene Metallized Epoxy Dip |
.01 - 2.2µF |
250 - 630 |
-40 ~ +85 |
| 5114 |
Combination Film Epoxy Dip, Low Voltage |
.01 - 3.3µF |
250 - 630 |
-40 ~ +105 |
| 5214 |
Combination Film Epoxy Dip, High Voltage |
.001 - .1µF |
1000 - 2000 |
-25 ~ +85 |
| 814 |
Polyester Film & Foil Epoxy Dip |
.001 - .47µF |
100 - 1000 |
-40 ~ +125 |
| 914 |
Polyester Metallized Epoxy Dip |
.01 - 6.8µF |
100 - 630 |
-40 ~ +105 |
| 914D |
Polyester Metallized Double Sided Metallized Polyester Epoxy |
.01 - 10.0µF |
100 - 630 |
-40 ~ +105 |
| Radial Box |
| SERIES |
DESCRIPTION |
CAP. RANGE |
VOLT. RANGE
(DC) |
TEMP. RANGE
(°C) |
| 2024 |
Polypropylene Box Type |
.001 - .33µF |
63 - 1000 |
-55 ~ +105 |
| 2124 |
Polypropylene Metallized Box Type |
.01 - 2.2µF |
250 - 630 |
-40 ~ +85 |
| 5224 |
Combination Film Box Type, High Voltage |
.001 - .082µF |
1000 - 2000 |
-25 ~ +85 |
| 6124 |
Polyester Metallized Motor Run/PF Correction |
1.0 - 30µF |
160 - 250 AC |
-25 ~ +70 |
| 7124 |
Polypropylene Metallized Motor Run/Power Factor |
1.0 - 25µF |
160 - 500 AC |
-25 ~ +85 |
| 924 |
Polyester Metallized Box S=10mm and Above |
.001 - 10µF |
63 - 1000 |
-40 ~ +105 |
| 9245 |
Polyester Metallized Box Type S=5mm |
.001 - 1.0µF |
63 - 400 |
-40 ~ +100 |
| 9247 |
Polyester Metallized Box Type S=7.5mm |
.001 - 1.0µF |
63 - 630 |
-40 ~ +100 |
| MPX |
Polypropylene Metallized Type X2 VAC |
.0047 - 1.0µF |
275 AC |
-40 ~ +85 |
| MPXM |
Polypropylene Metallized Type X2 VAC |
0.01 - 2.2µF |
275 AC |
-40 ~ +85 |
| Axial Round |
| SERIES |
DESCRIPTION |
CAP. RANGE |
VOLT. RANGE
(DC) |
TEMP. RANGE
(°C) |
| 2001 |
Polypropylene Wrap & Fill |
.00033 - .47µF |
100 - 2000 |
-40 ~ +85 |
| 2101 |
Polypropylene Metallized Wrap & Fill |
.01 - 4.7µF |
160 - 630 |
-40 ~ +85 |
| 2101V |
Polypropylene Metallized Wrap & Fill, High Voltage |
.01 - 4.7µF |
500 - 3000 |
-55 ~ +105 |
| 6001 |
Polyester Film & Foil Wrap & Fill Series Wound |
.1 - 2.2µF |
400 - 600 |
-40 ~ +85 |
| 801 |
Polyester Film & Foil Wrap & Fill |
.001 - 1.0µF |
100 - 1000 |
-40 ~ +125 |
| 901 |
Polyester Metallized Wrap & Fill |
.1 - 18.0µF |
100 - 630 |
-40 ~ +105 |
| Axial Oval |
| SERIES |
DESCRIPTION |
CAP. RANGE |
VOLT. RANGE
(DC) |
TEMP. RANGE
(°C) |
| 2102 |
Polypropylene Metallized Wrap & Fill |
.1 - 6.8µF |
250 - 630 |
-40 ~ +85 |
| 6002 |
Polyester Film & Foil Wrap & Fill Series Wound |
.1 - 2.2µF |
400 - 600 |
-40 ~ +85 |
| 902 |
Polyester Metallized Wrap & Fill |
.1 - 2.2µF |
100 - 630 |
-40 ~ +105 |
About Film Capacitors
The Tecate line of film capacitors is comprehensive in it’s breadth and depth. In addition to our vast line-up of catalog film capacitors, Tecate supports custom, application specific requirements as well.
Film capacitors, as a category, include any capacitor type made from plastic: polyester, polypropylene, polystyrene, etc. There are at least two types of film capacitors. Film-foil capacitors are constructed of layers (single or multiple) of plastic film dielectric wound alternately with metal foil electrodes. Metallized film capacitors are constructed of film dielectric on which the metal electrode has been previously vapor-deposited. The layers are wound into a convoluted roll (jelly roll), with electrodes extending beyond the dielectric films.
Film capacitors are designed using a number of different dielectrics. Dielectrics are the insulating materials between the plates of the film capacitor. Materials are chosen for their ability to permit electrostatic attraction and repulsion to take place across the film. Materials will have the property that energy required to establish an electric field is recoverable in whole or in part, as electric energy. In other words, good dielectric material is a poor conductor of electricity while being an effective supporter of electrostatic fields in film capacitors. Common dielectrics used in film capacitors include polyester, polycarbonate, polypropylene and polystyrene.
Polyester film capacitors offer a high dielectric constant and high dielectric strength with volumetric efficiency for metallized polyester film capacitors. Metallized polyester film has excellent self-healing properties. Typical applications include bypassing and coupling.
Polypropylene provides very low losses, low dielectric absorption, and high dielectric strength. In addition, polypropylene film capacitors offer very high insulation resistance and negative temperature coefficient. Typical applications include stable oscillators and filters, sample and hold circuits and pulse handle circuits.
|
Products
